LaCie 12big Rack Fibre 8 OperationUser Manual page 493.5.1. Setting Up the Embedded StorViewModule: Microsoft Windows1. Insert the Software and Manuals CD into your CD drive. Theauto-run program will automatically start the navigation menu.2. Click the Embedded StorView Setup Wizard link to begin theconfiguration.3. You are presented with a Welcome screen and instructions toproceed. Review the information and click the Next button. (Fig.62).4. The wizard will begin searching for Embedded StorView Mod-ules (Fig. 63).Those Embedded Modules with their default password intact areconsidered an Uninitialized System and will be displayed with theirMAC and IP address in the Uninitialized Systems window.5. From the Uninitialized Systems screen (Fig. 64), select the MACaddress of the Embedded Module you wish to configure. Usethe MAC address you noted for the specific RAID Controllerfrom the installation steps.✦ If you wish to use a DHCP server to assign your IP address,click the check box Use DHCP.✦ If you wish to manually configure your network setting, enterthe correction information in the appropriate fields.Enter a “new” password and enter the new password confirmation.Click the Configure button.6. If you have additional Uninitialized Systems, select the next MACaddress and choose the appropriate settings referring to theprevious step.Once you have completed configuring all the Uninitialized Systemsand have clicked the Configure button, the wizard will display apopup message indicating all systems have been configured. It willthen re-scan for any Uninitialized Systems and if none are found, youwill be taken to the Initialized Systems screen (Fig. 66).However, if you wish to only configure one Uninitialized System, theone you are configuring, and choose not to configure any otherdiscovered Uninitialized System, click the Next button. The promptshown in Fig. 65 will appear. Click the YES button to continue orNO to cancel and return to the Uninitialized Systems screen.IMORTANT INFO: While you are performing the setup if some-one plugs in a RAID Controller with an uninitialized module to thenetwork (same subnet mask) during the time of the rescan or resetsa system’s password back to the defaults, you will be taken to theUninitialized System screen again.continued on the next page>>Fig. 62 - Embedded StorView Setup Wizard - WelcomeScreenFig. 63 - Embedded StorView Setup Wizard - Search ScreenFig. 64 - Embedded StorView Setup Wizard - Systems Screen