LaCie 301138U - Ethernet Disk Mini NAS Server User Manual

Contents

LaCie 301138U - Ethernet Disk Mini NAS Server User Manual Manual pdf 36 page image

page LaCie Ethernet Disk miniUser Manual7. Using The LaCie Ethernet Disk mini Via USBBy utilizing the USB interface, you can connect the LaCie Ethernet Disk mini directly to a single computer, and access it anduse it as you would any direct-attach external hard drive.7.1. Getting Connected1. Connect the Hi-Speed USB 2.0 cable into the Hi-Speed USB 2.0 port on the back of the LaCieEthernet Disk mini.2. Connect the other end of the Hi-Speed USB 2.0 cable into an available USB port* on your com-puter. Your drive should power on automatically after connecting the USB cable.3. It may take a few seconds for your computer to recognizethe drive and for it to appear on the desktop or in MyComputer. Once it appears, the LaCie Ethernet Disk mini’sLogOn tool should start automatically.If there are no registered users (which will be the case if theLaCie Ethernet Disk mini has not been connected via Ethernetand User accounts created through the Web AdministrationPage), just click on the Log In button to access the LaCie Eth-Using the Ethernet Disk mini Via USBImpOrTANT INfO: When using the USB interface, the LaCie Ethernet Disk mini can not be accessed by the WebAdministration Page, or used by any network users.TeChNICAl NOTe: To achieve Hi-Speed USB 2.0 data transfer rates you need to be con-nected , either directly to the computer or through a hub, to a Hi-Speed USB 2.0 host inter-face. Otherwise, you will be limited to USB 1.1 speeds.ImpOrTANT INfO: If the LogOn tool does not startautomatically, double-click on the icon for the LaCieEthernet Disk mini and then double-click on the LogOntool’s icon.