LaCie 301352U User Manual
Also see for 2big Quadra USB 3.0: SpecificationsQuick install guideSpecificationsUser manualQuick install guide
                                    | |
Contents
| 
LaCie 2big Quadra • Design by neiL PouLton setupuser Manual page 14off auto onsafemixedbigfast2.2. Turn the Drive OnThe power supply kit is composed of two cables: one cable (A)connects to the LaCie drive; and the other cable (B) connects toa power outlet, such as a wall outlet or a surge protector.Connect Cable1. A to the 2big.Connect Cable2. B to the power supply brick (C).Connect Cable3. B to a surge protector or wall outlet.Turn on the drive by moving the power switch on the back4.of the drive to the “on” position.The 2big system may take up to 30 seconds to boot upCAUTION: Only use the AC adapter supplied with your spe-cific LaCie device. Do not use a power supply from anotherLaCie device or another manufacturer. Using any other powercable or power supply may cause damage to the device andvoid your warranty.Always remove the AC adapter before transporting your LaCiedrive. Failure to remove the adapter may result in damage toyour drive and will void your warranty.TeChNICAl NOTe: You may use your LaCie drive when in aforeign country thanks to its 100-240 Volt power supply. To beable to use this feature, you may need to purchase an appro-priate adapter or cord. LaCie accepts no responsibility for anydamage to the drive resulting from the use of an inappropriateadapter. Using an adapter other than one authorized by LaCiewill void your warranty.AbCNOTe: Depending on your country, power outlet connectionsmay be different from the one shown above.Fig. 2.2 |
Related manuals for LaCie 2big Quadra USB 3.0
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine