LaCie 301414U - d2 Network NAS Server User Manual

Also see for D2 BLU-RAY XL: Specifications User manual Quick install guide Brochure & specs User guide

Contents

LaCie 301414U - d2 Network NAS Server User Manual Manual pdf 12 page image

LaCie d2 Network Setting Up Your LaCie d2 NetworkUser Manual page 122.1. Turning On the d2 NetworkThe power supply kit is composed of two cables: one cable (A) con-nects to the LaCie drive; and the other cable (B) connects to a poweroutlet, such as a wall outlet or a surge protector (Fig. 04).1. Connect Cable A to the d2 Network.2. Connect Cable B to the power supply brick (C).3. Connect Cable B to a surge protector or wall outlet.4. Turn on the drive by moving the power switch on the back of thedrive to the “on” position.The d2 Network may take up to 60 seconds to boot up.CAUTION: Only use the AC adapter supplied with your specific La-Cie device. Do not use a power supply from another LaCie device oranother manufacturer. Using any other power cable or power supplymay cause damage to the device and void your warranty.Always remove the AC adapter before transporting your LaCie drive.Failure to remove the adapter may result in damage to your driveand will void your warranty.TECHNICAL NOTE: You may use your LaCie drive when in a for-eign country thanks to its 100-240 Volt power supply. To be able touse this feature, you may need to purchase an appropriate adapteror cord. LaCie accepts no responsibility for any damage to the driveresulting from the use of an inappropriate adapter. Using an adapterother than one authorized by LaCie will void your warranty.Fig. 04