LaCie 301425U User Manual

Also see for D2 BLU-RAY XL: Specifications User manual Quick install guide Brochure & specs User manual

LaCie 301425U User Manual Manual pdf 16 page image

LaCie d2 QuadraQuadruple Interface Hard Drive page Connect Cable A to your LaCie Drive.Connect Cable B to the Power supply brick (C).Connect Cable B to a surge protector or wall outlet.1.2.3.On the back of the drive, turn on the drive byflipping the power switch to ON or AUTO (drivepowers on/hibernates automatically; available onlyfor USB/FireWire connections).4.3.1. Connecting the Power SupplyThe power supply kit is composed of two cables: onecable (A) connects to the LaCie drive; and the othercable (B) connects to a power outlet, such as a wall out-let or a surge protector.offautoonFW4OO USB 2.OFW8OO FW8OO eSATA CCAUTION:Only use the AC adapter supplied with yourspecific LaCie drive. Do not use a powersupply from another LaCie drive or anothermanufacturer. Using any other power cable orpower supply may cause damage to the deviceand void your warranty.Always remove the AC adapter before trans-porting your LaCie drive. Failure to removethe adapter may result in damage to your driveand will void your warranty.••TeChNICAl NOTe:On/Off/Auto Power Switch:The AUTO position allows the drive to be pow-ered on and off automatically with your computer(works with USB and FireWire connection only).If the system’s power fan supports it, the LaCie d2Quadra will spin down while in the power savemode. The d2 Quadra will then take several sec-onds to spin up to full power. Use this positionwhen energy efficiency and quiet drive operationare priorities.The ON position is ideal for network configura-tions and allows quick access to your data. Youmust use the On switch to power on your drivewhen connected via eSATA.The OFF position is ideal for protecting your d2Quadra against viruses. The Off mode also isolatesyour hard drive from incorrect operation, protect-ing your data when your d2 Quadra is not in use.•••Installing Your LaCie Hard DriveTeChNICAl NOTe: If you are using theLaCie Serial ATA PCI Card to connect yourLaCie d2 Quadra Hard Drive to your com-puter, you can draw power from the PCI cardto operate your hard drive. Please refer to theLaCie Serial ATA PCI Card User Manual forguidelines and instructions.A B