LaCie D2 Blu-ray Drive User Manual
Also see for D2 BLU-RAY XL: SpecificationsUser manualQuick install guideBrochure & specsUser guide
                              | |
Contents
| 
LaCie d2 Blu-ray Drive Connecting Your LaCie d2 Blu-ray DriveUser Manual page 162.3. Connecting via the USB 2.0Interface CableIMPORTANT INFO: You can not have the FireWire and USB in-terfaces connected at the same time. If you would like to switchbetween interfaces, you must first unmount the drive.1. Connect the Power supply cable (2.2. Connecting the PowerSupply).2. Connect the Hi-Speed USB 2.0 cable into the Hi-Speed USB2.0 port on the back of the LaCie Blu-ray Drive. Turn the driveon using the on/off switch on the back.3. Attach the other end of the interface cable to an available USBport on your computer.4. Your drive should now be ready for use. To verify that your driveis correctly installed and communicating with your computer,follow these steps:Mac Users:In the Finder menu, click on About This Mac, then More Info. Thiswill open the Apple System Profiler. Your drive should be listed un-der the Hardware category.Windows Users:Right click your My Computer folder and select Properties. Click onGeneral. Your drive should be listed.TECHNICAL NOTE: Your drive must be connected to a USB 2.0port to work. See 1.4.1. Hi-Speed USB 2.0.TECHNICAL NOTE: For more information on USB connections, seethe following sections:1.4.1. Hi-Speed USB 2.04.7. USB Questions & AnswersLaCie Ltd.XXXXXXSerial Number XXXXXXXXXONOFFFig. 09 |
Related manuals for LaCie D2 BLU-RAY XL
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine