Using Your LaCie Drivepage 20LaCie DVD Dual DriveUser’s Manual4. Using Your LaCie DVD Dual Drive4.1. Inserting DVD and CD MediaTo insert a disc, push the load/eject button on your LaCie DVD Dual Drive. When the disc tray opens, put the DVD/CD mediainto the tray with the label side facing up. Make sure the DVD/CD is correctly placed in the center of the disc tray. Gentlypush in the disc tray or push the load/eject button to close it.4.2. Ejecting MediaWarning! Do not attempt to open the drive's media tray or remove the DVD/CD while the unit is in use and beingaccessed by the computer. You may injure yourself, and damage the drive and/or your computer system.Warning! Do not transport the drive with the tray open or with a DVD/CD inside it. Doing so may damage the driveand/or data stored on the disc, and will void your warranty.4.2.1. Mac UsersDrag the DVD/CD icon on the desktop to the Trash. The LaCie DVD Dual Drive's tray will then open. Remove the DVD/CD.Gently push in the disc tray or push the load/eject button to close it.4.2.2. Windows UsersAfter you have finished using the DVD drive and the computer is no longer accessing it, push the load/eject button. When thedisc tray is fully open, remove the DVD/CD. After removing the disc, gently push in the disc tray or push on the load/ejectbutton to close it.You can also go into My Computer and right click the DVD/CD drive icon. In the drop-down menu that follows, select theEject option. The disc tray will open, then you can access your media.4.3. Emergency Ejection of MediaWarning! Make sure the DVD drive is off and the power unplugged before attempting the emergency ejectionprocedure.In the event that a DVD/CD cannot be ejected with the load/eject button and the software is not controlling the drive, use theemergency eject operation to open the disc tray. First, switch off your computer and the DVD drive and unplug the drive'spower.