LaCie Ethernet Disk Accessing the Ethernet Disk Over the NetworkUser Manual page 20TECHNICAL NOTE: If you are operating under Windows or areusing Internet Explorer to connect via FTP, you can drag and dropobjects to upload files if the share is write enabled.TECHNICAL NOTE: The ftp command line exists under mostWindows versions, and on most UNIX operating systems.6.2. Connecting Via HTTP or FTPIf you have enabled HTTP share, you can access your share di-rectly from any computer with a current browser. Just open abrowser to http://[Ethernet Disk IP address] (the “Ethernet_Disk_IP_address” stands for the IP address assigned to your LaCieEthernet Disk by the LaCie Network Assistant).Once the page has loaded, you can choose how you want toconnect to the LaCie Ethernet Disk. Click the HTTP button to ac-cess in http mode, or FTP to access in the ftp mode.You can also connect directly to the FTP share by opening abrowser at ftp://[Ethernet Disk IP address]/[sharename].6.3. Connecting with an FTP ClientYou can use any FTP client to connect to the LaCie Ethernet Disk.Clients like LeechFTP (Fig. 19), CuteFTP, etc., will work normally.You can also use the command line command, “ftp”:1. Type: ftp [Ethernet Disk IP address]2. Enter your username and password.3. Type: cd /sharenameFig. 19
