LaCie LaCinema Classic Quick Install Manual

Also see for LaCinema Classic: User manual Quick install guide Specification Quick install guide

Contents

LaCie LaCinema Classic Quick Install Manual Manual pdf 20 page image

?? Setting up the LaCinema Classic HD BridgeTo get started, connect an external USB hard drive to the LaCinema Classic HD Bridge via one of the USB 2.0 host ports or inserta 3.5” SATA hard disk drive (5400 rpm recommended) within its enclosure. See the User Manual for more information.NOTE: The LaCinema Classic HD Bridge is compatible with NTFS and HFS+ non-journaled file systems.3.5” SATA Hard Disk Drive Insertion (Optional):1. Make sure the power cable is disconnected.2. Turn the drive over. Please DO NOT insert anything into the socket as it houses the LED and may affect your warranty.3. Open the casing by gently wedging the included case opening tool into the seam between the bottom plate andthe top shell.4. You may hear a slight “click” as the case opening tool’s angled extension grips the inside front of the metal casing.This sound is normal.5. Using the tool, remove the top shell. Turn the drive over.6. Slide the drive, label facing up, onto the bottom plate rails. The drive’s SATA connector plugs into the SATA port of theLaCinema Classic HD Bridge.7. Secure the disk drive in the casing by inserting the four included screws into the slots as indicated in the illustration.8. Replace the top of the casing by first aligning the ports on the bottom plate with the cutouts on the top shell and then gentlypress down. Please pay close attention to the connectors in the back of the device when replacing the top of the casing.Step 1: Transferring filesA. Copy media files from your computer via the USB interface. You can use:1. An external USB hard drive or key.2. The LaCinema Classic HD Bridge with a drive in the enclosure.B. Plug the power supply into an AC outlet and connect the power cable to the external USB drive (if needed) or theLaCinema Classic HD Bridge.C. When the drive mounts on your computer, transfer or copy files to it.D. When finished, unmount the drive safely.Step 2: Connecting to your TV and home networkA. Choose ONE of the following connection methods:1. HDMI: Connect the HDMI cable to the LaCinema Classic HD Bridge and to your TV.2. Composite: Connect the yellow composite cable to your TV and to the corresponding connector on the LaCinemaClassic HD Bridge. Next, plug the white and red stereo audio cables to your TV and to the LaCinema Classic HD Bridge.Optional: For multi-channel sound, you may connect the LaCinema Classic HD Bridge to a home theater systemthrough an optical audio cable (not included) or HDMI.NOTE: If you place the LaCinema Classic HD Bridge in a confined place, make sure to provide adequate airflow to ensure itdoes not overheat.B. If you have an Ethernet network, connect the Ethernet cable from your router or hub to the Ethernet port on the backof the LaCinema Classic HD Bridge.C. Plug the power supply into an AC outlet and connect the power cable to the LaCinema Classic HD Bridge.D. Turn on your TV. If you don’t see the loading screen, check the video input on your TV’s menu to make certain itmatches your video connection.E. Using the LaCinema Classic HD Bridge remote control, follow the prompts offered by the Installation Wizard.Press the OK button to confirm your selection and the Back button to go to the previous screen.NOTE: Please see the User Manual for more detailed instructions on the LaCinema Classic HD Bridge menu.Step 3: Playing FilesA. Play files located on an external hard diskConnect an external USB hard drive containing multimedia files to the LaCinema Classic HD Bridge through one of the USB 2.0host ports on its front or back panels. Use the remote control to access files in the appropriate Video, Photos, or Music Spaces.B. Play files located on the LaCinema Classic HD BridgeFiles you copied to a 3.5” SATA hard drive inserted into the LaCinema Classic HD Bridge are organized by type in the