LaCie blue eye pro Calibrating LaCie 300/500/700 Series MonitorsUser Manual page 30LaCie blue eye pro offers you an easy way to fine tune your LaCie300/500/700 Series Monitor’s White point and brightness.To use this tool on your Mac, please click on the Tools menubar and select the corresponding menu option. On MicrosoftWindows please right click the application bar and select thecorresponding menu option. The window to the right appearson your display. To adjust the chromaticity and brightness of theWhite point, move the 4 available sliders. The first three slidersadjust your display’s White Point Chromaticity.✦ Cyan to red: this slider will slightly increase (± 10 %) theRed or Cyan component✦ Magenta to Green: this slider will slightly increase (± 10 %)the Magenta or Green component✦ Yellow to Blue: this slider will slightly increase (± 10 %) theYellow or Blue componentWith the fourth slider you can adjust the brightness by ± 20%.Once you are visually satisfied with the modifications you per-formed, you can measure the influence of the changes in yourmonitor’s White Point and Luminance by placing the LaCie blueeye calibrator on the measuring target and clicking on the Mea-sure button. The software will measure the new White Point andBrightness and display them on the Finetuning window.Once the new White Point is satisfactory to you and has beenMeasured, click on Calibrate to implement the changes in yourcalibration. The calibration step will be performed as usual: seeSections 5.2.1. and 5.2.2. for details.5.8. Fine Tuning your LaCie 300/500/700 Series Monitor