LaMotte COD3 Plus Operator's Manual

Also see for COD3 Plus: Operator's manual

Contents

LaMotte COD3 Plus Operator's Manual Manual pdf 28 page image

28 COD3 Plus Colorimeter 11.07 TEST SEQUENCESSequence 1, Sequence 2, And Sequence 3 are alterable sequences. They maybe edited using the Editing Menu. Any of the LaMotte pre-programmed tests orUser Tests may be placed in these sequences in whatever testing order that ispreferred. Some examples of typical sequences are given below.NOTE: Test in the examples may not be included in the COD3 Plus.Sequence 1 Sequence 2 Sequence 3015 Chlorine F UDV 002 Aluminum 003 Ammonia-N LRF079 Phosphate HR 035 Cyanuric Acid 032 Cu UDV009 Benzotriazole 053 Iron Phenanthro 064 Nitrate-N LR076 pH UDV 055 Manganese LR 067 Nitrite-N LR12:00:00 001/500 12:00:00 001/500 12:00:00 001/500061 Molybdenum HR 064 Nitrate-N LR 074 pH PR086 Silica HR 067 Nitrite-N LR 078 Phosphate LR045 Hydrazine 077 Phenol 085 Silica LR032 Cu UDV 078 Phosphate LR051 Iron Bipyridyl 090 Sulfide LRThese alterable sequences allow a series of tests to be setup that are runfrequently. The order of the individual tests in the sequence is determined by theuser. After running a test, press ENTER to select the next test in the sequence.Continue this pattern until the entire sequence has been completed.All Tests is a fixed sequence containing the LaMotte pre-programmed tests, UserTests, and Absorbance tests.Modification of the alterable sequences is accomplished through the EditingMenu. This menu is explained in greater detail in Editing Menu (p. 39).Pressing EXIT while in a sequence menu will escape back to the Testing Menu.Pressing the at any time will turn the colorimeter off.www. .com information@itm.com1.800.561.8187