Lab 12 melto2 Owner's Manual

Contents

Lab 12 melto2 Owner's Manual Manual pdf 5 page image

LAB12 melto2 - Remote Controlled, Fully Adjustable Phono PreamplifierPage 5 of 12Front PanelMelto2 front panelOn the front panel you will see the OLED display, the Navigation rotary knob and the Operation rotary knob.The left rotary/push knob (A) is there for navigation into device's menu structure.The OLED display (B) is located in the middle of front panel. There, you can see all the interface menu details.With the right rotary knob (C) you can manually mute the output of melto2, to easily change a vinyl record orclean your cartridge needle without having to turn off the phono preamplifier or change your volume setting.Rear Panel ConnectionsMelto2 rear panelOn the rear panel you will find three inputs, two outputs, the main power input and the main power switch.From left to right you will find three (one for each input) grounding points (A) to connect the ground cable of yourturntable or tonearm. Right after, there are three stereo RCA sockets inputs (B, C, D). Just after, you will find twopair of RCA and XLR outputs, for left channel (E) and for right channel (F).On the right side of the rear panel, the main power inlet and the power switch (G) are located. In same position,Mains safety fuse is located, right bellow mains in socket.