Lab.gruppen PLM 12K44 Quick Start Manual
Also see for PLM 12K44: Operation manualOperation manualQuick start guideQuick start guide
                                | |
Contents
| 
13. Quick Start TutorialPLM+ SERIES Quick Start Guide rev 1.0.02121. Repeat step 16 and 20 for the B module. On the Output EQ/Crossover, tap the Aux Output Functionsbutton on the menu bar and then tap LPF Enable button. Drag the Low pass filter control object on thefrequency slider just above the menu bar to an appropriate crossover frequency for the sub, e.g. 100 Hz.22. Use the control options mentioned in 17 to tune your loudspeakers. For larger systems, modules can beplaced in groups (Groups menu from the MAIN page) for control of multiple units.13.4. Rational Power Management™Rational Power Management™ (RPM) is a unique Lab.gruppen feature that allows for flexible allocation of poweracross channels of a PLM+. Power that is not used by one output channel is free for use by another outputchannel with greater demands. RPM allocates power up to the total limits of the specific amplifier model. RPMexists in two modes. See the image below.PLM 12K44 - Amp channels power adjusted to match the loudspeaker requirements3000 WMIDSUB LOW HIGHOutput EQ control - Add LPF/HPF and EQ filters and drag to adjust. |
Related manuals for Lab.gruppen PLM 12K44
manualsdatabase
Your AI-powered manual search engine