Lab.gruppen TFS-900 User Manual
                                                     | |
Contents
| 
user manualFlashlineFlashline User Manualpage 41.1 Safety Instructions for 20000DP• Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.• Do not use this apparatus near water.• Clean only with a dry cloth.• Do not block any ventilation openings. Install in accordancewith the manufacturer’s instructions.• Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers) thatproduce heat.• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider thanthe other. A grounding-type plug has two blades and a thirdgrounding prong. The wide blade or the third prong is providedfor your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched,particularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.• Only use attachments/accessories specified by themanufacturer.• Unplug this apparatus during lightning storms or when unusedfor long periods of time.• Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatushas been exposed to rain or moisture, does not operatenormally, or has been dropped.• Use the mains plug to disconnect the apparatus from the mains.• WARNING: To reduce the risk of fire of electric shock, do notexpose this apparatus to rain or moisture.• Do not expose this equipment to dripping or splashing andensure that no objects filled with liquids, such as vases, areplaced on the equipment.• The mains plug of the power supply cord shall remain readilyoperable.• Do not connect the unit’s output to any other voltage source,such as battery, mains source, or power supply, regardless ofwhether the unit is turned on or off.• Do not remove the top (or bottom) cover. Removal of the coverwill expose hazardous voltages. There are no user serviceableparts inside and removal may void the warranty.• An experienced user shall always supervise this professionalaudio equipment, especially if inexperienced adults or minorsare using the equipment.• The US National Differences clause 16.3 requires that networkcables must be flame rated VW-1.• To prevent electric shock do not remove top or bottom covers.No user serviceable parts inside, refer servicing toqualified service personnel.• à prévenir le choc électrique n’enlevez pas les couvercles.Il n’y a pas des parties serviceable à l’intérieur, tousreparations doit etre faire par personnel qualifiéseulment.• To completely disconnect this equipment from the AC mains,disconnect the power supply cord plug from the ACreceptacle. The mains plug of the power supply cordshall remain readily operable.• Pour démonter complètement l’équipement de l’alimentationgénérale, démonter le câble d’alimentation de sonréceptacle. La prise d’alimentation restera aisémentfonctionnelle.1.2 StandardsThis equipment conforms to therequirements of the EMC Directive 2004/108/EC and the requirements of the Low VoltageDirective 2006/95/EC. Standards applied:EMC Emission, EN55103-1, E3, EMC Immunity EN55103-2, E3, with S/N below 1% at normal operation level.Electrical Safety EN60065, Class IThis equipment is tested and listed accordingto the U.S. safety standard ANSI/ UL 60065and Canadian safety standard CSA C22.2 NO.60065. Intertek made the tests and they are a NationallyRecognized Testing Laboratory (NRTL).1. Important Safety Instructions (Amplifiers)Before using the device, be sure to carefully read the Safety Instructions. Keep this document with thedevice at all times. |
Related manuals for Lab.gruppen TFS-900
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine