Labconco FreeZone Triad 74000 Series User Manual

Contents

Labconco FreeZone Triad 74000 Series User Manual Manual pdf 45 page image

Chapter 7: TroubleshootingProduct Service 816-333-8811 or 1-800-522-7658 41Heat Transfer Fluid PrecautionsThe fluid’s name and manufacturer are:Name: Lexol 542Manufacturer: Santa Barbara Chemical Co.927 Indio MuertoSanta Barbara, CA 93140805-963-7793The fluid used for heat transfer in this system iscombustible and hazardous. Leaks and spills shouldbe attended to immediately or serious injury couldoccur.Handling and Storage Precautions – Dirty Solvent: Store inaccordance with all applicable regulations. Tighten caps and store ina cool area.Precautions if Material is Released or Spilled: Spills should becontained immediately. Spills may be soaked up with absorbentmaterials, placed in closed containers, labeled, stored and disposed ofproperly. Persons performing this work should wear adequatepersonal protective equipment and clothing.Disposal of Non-Recyclable Solvents: Dispose of in accordancewith all federal, state, and local health and pollution regulations.Follow same guidelines as when disposing kerosene.Heat Transfer Fluid First Aid ProceduresEye Contact: Immediately flush eyes with fresh water for at least 15minutes. If irritation persists, get medical attention.Skin Contact: Wash contaminated areas with soap and water.Remove contaminated clothing and footwear. Wash clothing beforereuse. Discard footwear which cannot be decontaminated. Medicalattention may be required.Inhalation: Remove patient to fresh air. If breathing stops, giveartificial respiration. Get medical attention immediately, if required.Ingestion: Get medical attention immediately. Do not inducevomiting.