Labgear LAB450K User Manual
  |
Tri-Boom Ultra High-GainTV Aerial Grp. KLAB450KUser GuideSupport: www.labgear.co.uk/support 1General Safety PrecautionsDo not undertake work outdoors at height unless you arecompetent in the use of ladders and other access equipment.Always use correct equipment, observe appropriate safetyprecautions and follow manufacturers instructions. If in doubtconsult a professional installer.Before starting installation check structure is sound and check forhidden wiring or plumbing.When working on an installation outside, beware of overhead power lines.Observe safe working practices, tread carefully on roofs and ensureadequate lighting is available if working in loft or roof space.Before making any connections switch electricity off at the mains.To avoid injury always route cables or wiring carefully. Ensure cableis correctly routed before fixing into position, taking care not toovertighten cable clips.This kit contains small parts - keep out of reach of children.After installation make regular maintenance checks for wear and tear.Congratulations on the purchase of your high gain digitalaerial. The aerial is ideal for the reception of all availablesignals in weak and fringe areas. The aerial is of particularlyrobust construction to ensure a long operating life.• Ideal for fringe reception areas• Tilting mast clamp for easy adjustment• Tuned to prevent interference from 4G/5G mobile signals• Easy dipole assembly• Unique compact folding design• Electronic 75Ω balun• Connection: F type1. Triboom x12. UHF Reflector clamps x2(inc. bolt & wing nut)3. Dipole x1 (inc. wing nut x1)4. UHF Reflectors x25. Tilting Mast Clamp(inc. wing nuts x2)6. Weather Boot x17. F Plug x11224 43 5 67Box ContentsA123488Aerial assemblyFix the reflectors to the main boomusing the brackets and the bolt withwing nut suppliedFasten the balun to the underside of the mainboom as shown in Fig. 5. Make sure the balun is theright way round as shown in Fig. 4 and 8.B C1. Twist the lock to open2-3. Unfold the booms4. To lock the booms inposition turn both of thetwo knobs on eitherside of the aerial in aclockwise directionthrough 180˚ makingsure that the arrowsline up with the lockedsymbol - see Fig. 4. |
Related manuals for Labgear LAB450K
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine