USER’S MANUALDo not use a steam cleaner to clean the appliance.Ceramic cooktop :Hotplates must ALWAYS be kept dry. Wipe your utensils before placing them on the hotplates.Limescale can be removed by using white wine vinegar. Cover the marks with a cloth soaked in winevinegar and leave for 1/2 h before carefully rinsing and drying.Marks made by metal or superficial deposits which remain after the standard cleaning describedabove can be removed by using a liquid product for cleaning stainless steel utensils (e.g. creamstainless steel ZIP ®, stainless steel PPZ ®, etc.).The stainless steel part can be cleaned by using a damp sponge with a mild detergent for stubbornmarks (e.g. CIF Ammoniacal ®, etc.).If any sugar-based syrup falls on the glass ceramic hob during use, leave the element switchedto position 1, and, using a razor blade scraper (such as CERA Quick) IMMEDIATELY remove theremaining burnt-on layer.CAUTIONIf there is any visible sign of a surface crack, immediately isolate appliance from thesupply to prevent risk of electric shock. Contact your installer.Brass trim :Use a special brass-cleaning product (e.g. MIROR ®) and a soft cloth. If the product runs onto theenamel do not rub (these products generally contain abrasives). Rinse immediately with clean waterwithout rubbing.Another solution is to use solid soap (Pierre d’argent, Pierre d’argile) applied with a damp sponge tothe zones to be cleaned.This solution is also very effective for cleaning and bringing a shine back to brass or chromesurfaces.Enamelled surfaces :Use a sponge soaked in soapy water or a window-cleaning product but never scouring powder.You can also use methylated spirit but only when the range is cold.Ovens :Clean the walls with a non-abrasive cleaning agent. Harsh cleaning agents should not be used.Where the use of such products cannot be avoided, first remove the oven door gasket and reinstallafter cleaning.Rinse and dry.Clean the area behind the sheet protecting the turbine(s) at least once a year. The grease carriedby the airflow and when the range is used at lower temperatures can create smoke.Do not spray strong cleaning products directly onto the elements in electric ovens.After cleaning, before use make sure that the base is properly fitted under the groove in the fasciain order to avoid deformation of the base due to heat.Before any cleaning work, close the gas supply and/or isolate fromthe mains supplyCLEANING AND MAINTENANCECiteaux induction - Ft 158a - GB - Rév 06 - Modifié le : 07/10/2013 34/36