INSTALLER’S MANUAL$OOZRUNRQRUUHSDLURIDQDSSOLDQFHPXVWEHFDUULHGRXWE\DTXDOL¿HGHQJLQHHUGreasing gas valve (Hobs and Ovens) :The valve may lose its grease through use. It is therefore necessary to grease the valve in order tomake it leaktight and facilitate turning.1 - Shut off the valve and / or the main electrical supply of the unit.2 - Take out the knob corresponding to the gas valve to be greased.3 - Unscrew the head from the body of the burner valve.4 - Grease the tap shaft (high temperature lubricant, for example : SILICAL GEL ™ BARBAHL).Caution ! Any excess grease should be removed.Reverse operation 3 to 1 (in that order) to put valve and knob back on.Electric Limiting thermostat :In accordance with the construction regulations, the limiting thermostat is intended to protect therange from overheating.In the event of overheating the limiting thermostat is triggered and cuts out the range’s ovenfunctions.The advanced technology used in the limiting means that it is very sensitive to impacts andvibration that may occur during transport and handling.The limiter may therefore be unexpectedly triggered when the oven is first heated and stop theoven from working.To reset limiting thermostat for electric ovens with :Gas hob :1- Remove the ventilation strip from the rear of the hob .2- Unscrew the cover protecting the knob .3- Press the knob marked (see A / figure 1 ).Electric hobs :The button is behind the ventilation strip .To have access there, it is necessary to use a small screwdriver to press on the push-button andreset limiting thermostat (see B / figure 2 ).SERVICING / REPAIRS1 2A BCluny - Ft 121a - GB - Rév 06 - Modifié le : 07/10/2013 18/41

technical data

installation / positioning

gas connection

opening and closing the hob

electric connection

servicing / repairs

gas circuit

simmer plate (on traditional hob)

recommendations before using ovens

gas oven

static electric oven

cleaning and maintenance

Lacanche CLUNY Installation Instructions Manual

CLUNY