Lacanche CORMATIN LG 731 G User Manual

Contents

Lacanche CORMATIN LG 731 G User Manual Manual pdf 41 page image

USER’S MANUALDo not use a steam cleaner to clean the range.Gas hobs :The burners are made in two parts in order to facilitate cleaning. Clean them separately,.ĺ%XUQHUFDSBurner caps are made of solid brass. Use a special brass-cleaning product (e.g. MIROR ® orBRASSO®) and a soft cloth.If the product runs onto the enamel do not rub (these products generally containabrasives). Rinse immediately with clean water without rubbing.If the caps are very dirty polish them with very fine sand paper and then rub them with a coppercleaner.ĺ%XUQHUERG\The aluminium bodies of the burners become stained with use. They should be cleaned regularlywith a scouring pad (Scotch Brite ®).After removing the pan supports and burners, the cooking surface can be cleaned easily andthoroughly by simply using a sponge.Do not use scouring pads or abrasive products such as oven cleaners and stain removers.When cleaning, be careful not to splash liquid into the openings of the burners.Traditional Hob (Simmer Plate) :Do not use water to clean the simmer plate when it is hot. This can damage it.Immediately remove any spillages to make cleaning easier.Use a sponge moistened with soapy water or scouring powder.Radiant Electric hob :Hotplates must ALWAYS be kept dry. Wipe your pans before placing them on the hotplates.Limescale can be removed by using white wine vinegar. Cover the marks with a cloth soaked in winevinegar and leave for 1/2 h before carefully rinsing and drying.Marks made by metal or superficial deposits which remain after the standard cleaning describedabove can be removed by using a liquid product for cleaning stainless steel pans (e.g. creamstainless steel ZIP ®, stainless steel PPZ ®, etc.).The stainless steel frame can be cleaned by using a damp sponge with a mild detergent for stubbornmarks (e.g. CIF Ammoniacal ®, etc.).If any sugar-based syrup falls on the glass ceramic hob during use, leave the element switchedto position 1, and, using a razor blade scraper (such as CERA Quick) IMMEDIATELY remove theremaining burnt-on layer.CAUTIONIf there is any visible sign of a surface crack, immediately isolate appliance from theelectrical supply to prevent risk of electric shock. Contact your installer.Before any cleaning work, close the gas supply and/or isolate fromthe mains electricities supplyCLEANING AND MAINTENANCECormatin - Ft 120a - GB - Rév 07 - Modifié le : 07/10/2013 41/44

/ 44

Related manuals for Lacanche CORMATIN LCF 731 CT