Lacros Scamper S600 Original Manual
Also see for Scamper S600: Manual
              | |
CE ORIGINAL MANUAL SCAMPER S600VERSION CE 1.1 EN11General information about the E-Bike:1. The E-Bike is mechanically the same as a normal bike. All moving parts, like cables, brakes, gear and axes can bemaintained by using silicon or telfonspray.Check on a regular basis if all bolts and screws are secured. Important points are front and back wheel, luggage rackand steering.When closing the large hinge attachment (frame clamp), note that a certain rising back pressure is felt until the deadpoint is over. If you are in doubt about the proper operation of the hinge clamp, contact us and do not use the bicycle.Tip: Spray chain and gear after a wet parcours, the chain needs the most lubrication. You can clean the chain with a cleaning kit, available at any bike shop. Tire size is 20 inch, available at any bike shop. Caution with moist, store the bike in a dry environment. Sensitive parts are the display unit and the controller. Rusting parts can be treated with telfonspray. Keep the bike clean and dry to limit corrosion.2. For gear adjustments you can contact our service lineor your local bike technician. Many information aboutShimano gears is available on the internet.3. Keep the tires on tension. This improves drivingexperience and range. We recommend a tire pressurebetween 3.5-4.0 Bar.4. Brakes may need to be adjusted after a while. Thiscan easily be done on the brake levers on the steeringwheel. For safety reasons, consult a bike technician forgear and brakes adjustments on the wheel side. |
Related manuals for Lacros Scamper S600
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine