INSTRUCTIONS FOR THE INSTALLER 62.2.2.2. Location of the appliance in theroomChoose a location in the room whichfavours good hot-air distribution byconvection and radiation.The interior of the apparatusincorporates two handles which facilitateits transferral to its final location. Hold theapparatus on both sides, as displayed inthe image:Figure No.3 - Positioning the handles fortransferral2.3. Installation of the appliance2.3.1. FloorMake sure that the base can withstandthe total constructed weight of theappliance and its casing.The apparatus should not be placed oncombustible material.2.3.2. Safety distancesBe sure to respect the applianceinstallation distances from combustiblematerials. Looking at the appliance head-on:Distance tocombustiblematerials(mm)From the right-hand side 400From the left-hand side 400From the rear 400From the front 1000Bear in mind that it may even benecessary to protect non-combustiblematerial in order to prevent breakage,deformation, etc., as a result ofoverheating if the non-combustiblematerial is not designed to withstand hightemperatures.2.3.3. Checks before lighting for the firsttime• Make sure that the glass/es is/arenot broken or damaged.• Make sure that the flueway is notobstructed with packing or loose parts.• Check the deflectors are correctlypositioned.• Make sure that the airtight jointson the flue circuit are in perfectcondition.• Make sure that the doors closeproperly.• Make sure that all moving parts arefitted in place.2.3.4. Height adjustment and levelling theapplianceThe apparatus incorporates 4 adjustablelegs for its levelling and height adjustmentwith a 24 mm wrench.Figure No.4 - Close up of the 24 mmwrench for adjusting the legsIf a fitting height of below 535 mm isrequired, the 4 legs can be removed byunscrewing them completely.