Lagler Trio Operation Maintenance Safety

Lagler Trio Operation Maintenance Safety Manual pdf 17 page image

175.2 REASSEMBLY AFTER TRANSPORTWhen reassembling your TRIO after transporting it please proceedaccording to the following sequence:1 Roll chassis into attachment position so that the two fastenerscan be homed in.2 Tighten the two crossnut fasteners firmly.3 Remove the on/off switch from motor switchbox and hook itinto support on the chassis.4 Insert the plug of the sensor into the on/off switch and lockthis fasten connection by turning the ring nut. Make surethe nose of the plug is inserted in the groove of the socket(Fig. 21).Machine will not start as long as this plug is disconnected!5 Mount dust suction hose to the neck of the dust suction andgear casing.5.3 STORAGEIf the machine is to be stored for a longer period, make sure it isstored in a dry, frost-free room which is not subject to great fluctua-tions in temperature.Fig. 21 Make sure that the nose of the plug is insertedinto the groove of the socket.TRANSPORT AND STORAGEProfessional tip:Remove the sanding gear from the machine whenthe machine is not to be used for longer periods,because otherwise the machine weight can dam-age the flexible sanding disc base.ATTENTION!Always store your machine without a dust bag or with an emptyone, never with dust in the bag (danger of fire!).5