Davits (optional extra)z INSTALLING A TENDER ONTO THE DAVITS- Fix the davit line hooks to the forward and aft of the tender.- Close the blockers found on the davits.- Pull the bow of the tender up to halfway using the cockpit winch.- Repeat the operation for the stern.- Alternatively raise bow and stern until the tender comes into contactwith the davits.z LAUNCHING A TENDER FROM THE DAVITS- Ensure that the blockers on the davits are closed.- Thread the davit rope attached to the stern of the tender around thewinch (minimum of three turns).- Open the blocker and let the line feed out until halfway.- Close the blocker.- Repeat the procedure for the bow.- Alternatively lower stern and bow until the tender comes intocontact with the water. EnvironmentDo not discharge oil into the sea.Take every precaution to prevent hydro-fuel overflow when filling theengine tank.When in port, only use the onboard toilets if they are equipped withorganic waste reservoirs.The use of detergents is implicated in the destruction of marine plantand animal life. Choose fully biodegradable cleaning products.Do not throw plastic bags and bin bags into the sea. Use the binsprovided for this purpose at ports.NAVIGATION21NAVIGATION1LAGOON 44ORECOMMENDATIONWe share a love for the ocean. Help us to preservethem!WARNINGNobody should be aboard the tender duringmaneuvers carried out with the davits. Tie up thetender out of the way during maneuvers.WARNINGThe davits are designed to support a maximum loadof 250 kg and a tender of 3.80 meters in length atmaximum.WARNINGWhen under sail remove the tender engine and storeit on board the boat.Secure the tender according to sea conditions.