Laser Type Water cooled CO2 sealed laser, 10.6μm wavelengthLaser Power 40 WattWork Envelope 12″L x 20″W (cm: 30.5, 50.8)Max Material Thickness 3/4" (1.9 cm)Max Material Thickness Bottomless InfiniteEngraving Speed 0-500mm/sCutting Speed 0-500mm/sLaser Output Control 0-100% Set by SoftwareMin. Engraving Size 1mm x 1mmHighest Scanning Precision 4000 DPILocating Precision ≤+0.01mmControlling Software Ruida RDWorksGraphic Format Supported DST PLT BMP DXF DWG AI LAS, etc.Color Separation YesWorking Environment 32º – 104 º F , Humidity 5-95%Phase 1 PHVoltage 110VMotor Type 2 x steppersMotor Spec 4.0 AMP (1-8°)Cycle 50HZ or 60HZ (auto switching)Full Load Amperage 14.5 AMP .Switch Type Automatic shut offPower Cord IEC320-C13 to NEMA 5-15PPower Plug Included NEMA 5-15PNEMA Breaker Recommendation 15 AMPPl1220 Laser Machine SPECIFICATIONSMLC122040© 03/2018, Laguna Tools, Inc.The information contained in this publication was correct at the time of print. In the interest of continuous innovation, we reserve the right to change specifications, design or included equipment without no-tice or obligation. No part of this publication may be reproduced, transmitted, or translated into any language in any form by any means without our written permission. Errors and omissions may be current.© 2018, Laguna Tools, IncAll rights reserved.See back cover for dimesnional drawingsFoot Print (LxW) 30"L x 40"W (cm: 76.2, 101.6)Overall Dimensions (LxWxH) 30"L x 40"W x 9"H* (cm: 76.2, 101.6, 22.9)Shipping Dimensions (LxWxH) 1 of 2: 35”L x 42”W x 16”H. 2 of 2: 16”L x 42”W x 19”H.Net Weight (No Accessories) 150 Lbs. (68.04 Kgs.)Shipping Weight 230 Lbs. (104.3Venting: Outlet Dia. 1 x 6"Venting: CFM Min. Req. 300 CFMSound Emissions 55 dBA*Machine needs 27.5” (69.9 cm) height clearance to open lid.