Lainox Oracle Series User Manual

Lainox Oracle Series User Manual Manual pdf 27 page image

PIN CodeIf enabling the PIN Code, select a 4-digit numeric PIN. The PIN Code must be enabledbefore the qualified technician can enter Service ModePreheat WarningTo guarantee that oven reaches the desired temperature before the start of cook cycle,enable Preheat Warning in user options. Enable setting when using recipe with differentstarting temperature than default Preheat TemperatureUser OptionsThere are several options you can change to customize the operation of theoven for your business. The table on page 28 shows these options; thefactory setting is shown in bold type.Accessing and modifying user options:1� Touch the blue menu icon at the bottom of the screen.2� Scroll down and touch to select “User Options”.3. Use this menu to modify oven settings.Touch the left arrow to return to the menu after making eachchange.Note: Programming the preheat temperature in the user optionsmenu will set the oven to heat to a certain temperature each time it ispowered onAllow Manual CookingThe Allow Manual Cooking option must be enabled in order to view Allow Manual Saveoptions�Clean Filter ReminderWhen the “Clean Filter” message is displayed, clean the air filtersthoroughly. Cleaning the air filters will not shut off message. Messagewill automatically stop displaying after 24 hours.a� Check “Filter Cleaned” box to confirm clean.b� Select “Dismiss” to close the pop-up.Note: If the “Filter Cleaned” box is checked, the reminder time is alsoreset.How often the air filters need to be cleaned depends on the use of the microwave oven andenvironmental conditions. Once frequency is determined, set the user option for appropriatetime frame.Air filters and vents must be cleaned regularly to prevent overheating of oven. Refer to «1.Air filter» on page 24 for cleaning instructions.Time and DateThis oven maintains a data log of information, including date and time of operation. Thisinformation is used to diagnose and troubleshoot errors. An accurate date and time areimportant for the data log.1� Select the time. Choose the format (12 hours or 24 hours). Enter local time.2� Touch the left arrow to return.3. Choose the date. Choose the format (MM/DD/YYYY or DD/MM/YYYY).Enter today’s date.4� Touch the left arrow to return.22790035620rev01