Laird SDC-EC15N Hardware Integration Manual
                 | |
SDC-EC15NHardware Integration GuideEmbedded Wireless Solutions Support Center:http://ews-support.lairdtech.comwww.lairdtech.com/bluetooth 14© Copyright 2015 Laird. All Rights ReservedAmericas: +1-800-492-2320Europe: +44-1628-858-940Hong Kong: +852 2923 0600When using Laird’s IC grant for the SDC-EC15N, the integrator must include specific information in the user’sguide for the device into which the SDC-EC15N is integrated. The integrator must not provide information tothe end user regarding how to install or remove this RF module in the user’s manual of the device into whichthe SDC-EC15N is integrated. In addition to the required FCC statements outlined above, the following ICstatements must be added in their entirety and without modification into a prominent place in the user’sguide for the device into which the SDC-EC15N is integrated:To prevent radio interference to the licensed service, this device is intended to be operated indoorsand away from windows to provide maximum shielding. Equipment (or its transmit antenna) that isinstalled outdoors is subject to licensing.The integrator must list out information for each antenna used with the host device into which theSDC-EC15N is integrated. The following examples are based on the integrated antenna with which theSDC-EC15N was certified and represent an acceptable format:Summit SDC-CF22G Antenna (click for datasheet) Form Factor: Chip Antenna on PCB Type: Dipole Maximum 2.4 GHz Gain: 0 dBiCisco AIR-ANT 4941 (click for datasheet) Form Factor: Whip Type: Dipole Maximum 2.4 GHz Gain: 2.2 dBi Tested and Certified 2.4 GHz Transmit Power: 90% of maximum settingRadiall Larsen Dipole (click for datasheet) Form Factor: Whip Type: Dipole Maximum 2.4 GHz Gain: 1.6 dBi (not used during testing) Maximum 5 GHz Gain: 5 dBiHUBER+SUHNER (click for datasheet) Form Factor: Whip Type: Monopole Maximum 2.4 GHz Gain: 3 dBi Maximum 5 GHz Gain: 6.5 dBi Tested and Certified 2.4 GHz Transmit Power: 95% of maximum setting Tested and Certified 5 GHz Transmit Power: 100% of maximum settingEuropean UnionUser’s Guide RequirementsThe integrator must include specific information in the user’s guide for the device into which the SDC-EC15Nis integrated. In addition to the required FCC and IC statements outlined above, the following R&TTEstatements must be added in their entirety and without modification into a prominent place in the user’sguide for the device into which the SDC-EC15N is integrated: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine