Laird Sentrius RG1 Series User Manual

Also see for Sentrius RG1 Series: Quick start guide Quick start guide User guide Configuration guide

Laird Sentrius RG1 Series User Manual Manual pdf 14 page image

Sentrius RG1xxUser ManualEmbedded Wireless Solutions Support Center:http://ews-support.lairdtech.comwww.lairdtech.com/ramp14© Copyright 2017 Laird. All Rights ReservedAmericas: +1-800-492-2320Europe: +44-1628-858-940Hong Kong: +852 2923 06105.1 IPv4 ConfigurationThe default page for configuring the Ethernet LAN connection is the IPv4 Configuration page. There are twobasic modes of operation: DHCP and Static. These are selected in the IP Address Acquisition Method drop-downbox (Figure 10).Figure 10: IPv4 Configuration page DHCP – When in DHCP mode, all settings are provided by the DHCP server. All configuration settings(except IP Address Acquisition Method) are greyed out. IP values provided by DHCP are displayed butcannot be changed. Static – When the IP Address Acquisition Method is set to static, all IP settings are fixed and saved in thedevice. The external Gateway IP Address is optional and may be left blank. DNS Server IP addresses are alsooptional. Zero, one, or two DNS servers may be specified.5.2 IPv6 ConfigurationSelect the IPv6 configuration by clicking the IPv6 menu item in the side menu of the LAN view (Figure 10). TheIPv6 configuration settings are shown below.There are two fully-supported modes for IPv6 addressing: DHCP – In DHCP mode, all settings are provided through communication with an IPv6 server on thenetwork. Auto – In auto mode, you have the option of selecting the auto DHCP method (either stateless or SLAAC).As of June 2017, IPv6 static mode is only partially supported. Please see the software release notes forcurrent information.