Lake Shore Model 370 AC Resistance Bridge User’s Manual6.1.5.2 Visual Basic IEEE-488 Interface Program SetupThis IEEE-488 interface program works with Visual Basic 6.0 (VB6) on an IBM PC (or compatible) with a Pentium-class processor. A Pentium 90 or higher is recommended, running Windows 95 or better. It assumes your IEEE-488(GPIB) card is installed and operating correctly (refer to Paragraph 6.1.5.1). Use the following procedure to develop theIEEE-488 Interface Program in Visual Basic.1. Start VB6.2. Choose Standard EXE and select Open.3. Resize form window to desired size.4. On the Project Menu, select Add Module, select the Existing tab, then navigate to the location on your computer toadd the following files: Niglobal.bas and Vbib-32.bas.5. Add controls to form:a. Add three Label controls to the form.b. Add two TextBox controls to the form.c. Add one CommandButton control to the form.6. On the View Menu, select Properties Window.7. In the Properties window, use the dropdown list to select between the different controls of the current project.10. Set the properties of the controls as defined in Table 6-1.11. Save the program.Remote Operation 6-7
