Lambda ZUP6-33 User Manual

Lambda ZUP6-33 User Manual Manual pdf 22 page image

3.8.2 Pin Description3.8.3 External Control Connector - Technical description1. Connector type : AMP, Part No: 102617-5 14 contacts, double row.2. Receptacle : AMP, Part No: 87631-9, Polarized, 14 contacts, double row.3. Receptacle contacts : AMP, Part No: 87523-5 (strip form) or 87523-6 (loose piece).4. Wires : AWG: 24 to 20.5. Hand tool for wire connection : AMP, Part No: 90202-2.6. Applicator for stripper/crimper machine : AMP, Part No: 466905-1# Name1 RCVP2 RCCP3 VRFI4 VCCP5 VRFV6 VCVP7 OUTPUTGOOD8 P9 ON/OFF10 COM11 + LS12 + S13 - LS14 - SDescriptionResistive Constant Voltage programmingResistive Constant Current programmingReference voltage for Constant Current control. (connected toVCCP pin except external voltage or resistive programming).Input of the Constant Current control circuit.Reference voltage for Constant Voltage control. (connected toVCVP pin except external voltage or resistive programming).Input of the Constant Voltage control circuit.Open collector output. 0~0.8V during normal operation, open atfault condition (OVP, FOLD and Over-Temp.).Parallel connection pin.On/Off control pin.Common pin for programming, On/off control and Output Goodsignal. Internally connected to - Sense.Positive Local sensing pin.Positive Sensing pin for remote sense operation.Negative Local sensing pin.Negative Sensing pin for remote sense operation.4.4.104.4.104.4.10, 11, 124.4.10, 11, 124.4.10, 11, 124.4.10, 11, 124.4.154.4.134.4.84.4.10, 11, 124.4.83.7.3, 4, 5, 63.7.3, 4, 5, 63.7.3, 4, 5, 63.7.3, 4, 5, 6Par.Table 3-3: External Control connector pin descriptionCAUTIONCOM pin (10) is connected internally to the - Sense potential. Connection of the COM to anotherpotential or other than shown in this manual may cause damage to the power supply.