Lamborghini Caloreclima DOUBLE Series Installation - Use - Maintenance
                                                                                                        | |
Contents | 
27GENERAL INFORMATIONOf radically new and original design and conception, MULTIMODE PLUS was created in order to offer a product which is technologically advancedand reliable.MULTIMODE PLUS is the first valve to have double-effect hydraulic command in order to prevent the problems caused by mechanical control.This new design contains a large number of advantages, the most important of which are listed below:- EASY MAINTENANCEBy unscrewing a plug, it is possible to extract the piston as well as any inner part of the valve cylinder, leaving the valve in its original position.- NO WATER HAMMERING DURING OPERATION AND REGENERATIONThe operating piston is always balanced in its movement by the water pressure in the two control chambers.- SELF-DISINFECTION OF THE RESINS FOR THE VERSIONS DOUBLE 35-50-65-85-125.The MULTIMODE PLUS valve fitted with the kit CL2kk100 automatically produces sodium hypochlorite during the brine suction stage. In this waythe resins are protected from the spread of bacteria.- IMPOSSIBILITY OF BREAK DOWN OF THE STARTING MOTOR OF THE CAMSThe carefully designed route followed by the water during the various stages of regeneration does not cause abnormal stress on the motor andso the cam moves evenly.- GREATER FLOWRATES FOR BACKWASH OPERATION AND DRAINThis enables regeneration of greater quantities of resin in the time unit. A greater flowrate in washing (comparable to the operating capacity ofthe other valves) improves the efficiency of the resins.- LESS LOAD LOSS DURING OPERATIONThis means lower operating costs.- ABSENCE OF METAL OR COATED INNER PARTSNo risk of corrosion.- THE OPERATING SYSTEM ALWAYS GUARANTEES FIVE STAGESThe new operating system eliminates the possibility of skipping a stage, before starting the next.- FLEXIBILITY OF APPLICATION TO DIFFERENT PLANSBy means of the By-pass unit it is possible to use the water during regeneration. Simply removing the ejector and/or the flow-regulator allowsthe regenerating suction and/or drain capacities to be modified.It is possible to apply interchangeable optionals which modify the features of the valve with obvious economic advantages and the possibility ofhaving different features available with a limited number of accessories in stock.SEQUENCE OF REGENERATIONSTAGES 165-215-330-550 PLUSSERVICE STAGE IN EQUI-CURRENT WITH SUPPLYOF SOFTENED WATER- In this stage we have pressure in points 3 - 1 of thepilot control, transmitted to the pistons F - Gin points 3 - 1 of the valve.- The black arrows indicate the hard water route.- The white arrows indicate the softened water route- C = UNTREATED WATER INFEED- B = SOFTENED WATER OUTFEED- E = DRAIN (RINSE WATER)- D = BRINE SUCTION POINT- A = UNSTABLE VALVE, OPERATING ASAUTOMATIC BY-PASS TO SATISFYTHE DEMAND OF HIGHINSTANTANEOUS FLOWRATE221133BDCA44F GSCARIC OVALVOL A EIET TOREECORPO VALVOL APILOTA DICOMANDOSISTEMA DICONTROLLO TIMERDIFFUSORE SUPERIORECONTEN ITORE RESINEDIFFUSORE INFERIORE TINOSALAMOI ACONTROLSYSTEMCONTROLPILOTVALVE BODYEJECTORDRAINBRINETANKUPPERDIFFUSERRESINCONTAINERLOWERDIFFUSERVALVE |
manualsdatabase
Your AI-powered manual search engine