Lamona LAM8301 Installation And Operation Instruction Manual

Lamona LAM8301 Installation And Operation Instruction Manual Manual pdf 10 page image

9 GBElectrical requirementsBefore you insert the plug into the wallsocket make sure that the voltage andthe frequency shown in the rating labelcorresponds to your electricity supply.We recommend that this appliance beconnected to the mains supply via asuitable switched and fused socket in areadily accessible position.If the supply cord or the mains leadis damaged please do not replace ityourself. The supply cord or the mainslead must be replaced by a LamonaAuthorized Service Agent or a similarlyqualified person.ImportantFitting a different plugAs the colours of the wires in themains lead of this appliance may notcorrespond with the coloured markingsidentifying the terminals on your plug,proceed as follows:1. Connect the green - yellow orgreen (earth) wire to the terminalin the plug marked ‘E’ or with thesymbol or coloured greenand yellow or green.2. Connect the blue (neutral) wire tothe terminal in the plug marked ‘N’or coloured black.3. Connect the brown (live) wire tothe terminal in the plug marked ‘L’or coloured red.With the alternative plugs a 13A fusemust be fitted either in the plug oradaptor or in the main fuse box. If indoubt contact a qualified electrician.WarningThis appliance must beearthedIf the fitted moulded plug is not suitablefor your socket, then the plug shouldbe cut off and an appropriate plugfitted.Destroy the old plug, which is cut off asa plug with a bared cord could cause ashock hazard if inserted into a socketelsewhere in the house.The moulded plug on this applianceincorporates a 13A fuse. Should thefuse need to be replaced an ASTAapproved BS1362 fuse of the samerating must be used. Do not forgetto refit the fuse cover. In the event oflosing the fuse cover, the plug must notbe used until a replacement fuse coverhas been fitted.