1TOUCHLESS MULTI-PURPOSE LID AZ-ATInstallation instructionsPARTS DESCRIPTIONDIMENSION DRAWINGThank you for using our product. Before installation, please read this manualthoroughly to ensure correct installation.Please keep this manual at hand for future reference.Description QuantityFlap lid bodySticker (warning)Cover capScrew jigThe lid opens automatically when the sensor detects a presence.The sensing distance of the sensor can be adjusted from 0 to 300 mm byadjusting the knob on the back.TOOLS NEEDED FOR INSTALLATIONFOR YOUR SAFETY AND CORRECT INSTALLATIONABOUT THE PRODUCTItem No A B W H C P DAZ-AT230-HL 234 160 319 266.5 49 95 184.7AZ-AT310-HL 310 220 395 340 64 140 244.7CUTOUT DIMENSIONSAC Adaptor (sold separately)Screws (not provided)Choose the suitable length according to the material to be mounted.Recommended screw : Tapping screw Nominal 3 4 pcsA10100Auto-openingangle: 80C P4 I 3.5holesfor fixing screwswhen flap at 90 WHB382.4 14 R6 Max.324 114054147.54 R6 Max.248.5 11429539Mountingscrew holesAZ-AT230-HLAZ-AT310-HL153.2 0.5132.5 0.5Mountingscrew holesCut out: Backside viewCut out: Backside view450°300FrontSide200200453002515Sensing rangeCaution If not followed, injury or damage may result.This product is designed to function when installed vertically as shown below. Horizontal, slanted or upside down installation will result in improperfunction and may lead to injury.To avoid any risk of accidental injury, ensure that the product is securely fastened to a support with adequate strength.Do not use this product for any purpose that is outside of the specifications of this manual.Do not use outside or anywhere it will be exposed to water. It may cause failure.Do not use in places where strong radio waves are generated. It may cause malfunction.Ambient temperature range is 0 to 40 CThe closing speed of the lid may vary according to ambient temperature. If the product is stored below zero degrees allow it to reach roomtemperature before use.Due to the characteristics of the sensor, the sensing distance varies depending on the object.ProhibitedWarningCaution RequiredMeaning of symbols