Lamp HG-JHS9 Series Installation Instructions Manual

Lamp HG-JHS9 Series Installation Instructions Manual Manual pdf 1 page image

1PRECAUTIONS FOR USE The possibility of injury or property damage only is assumed.This product is for indoor use only. Do not use outside or anywhere where it will be exposed to water.Do not use for an other purpose or with specifications other than those shown in this document.Do not use excessive force with the damper as this may result in damage.If the operating temperature increases, the door movement becomes quicker. If the temperature decreases, movement becomes slower. This is not a mechanical problem.Left RightLeft RightRear-mounted TypeSide-mounted typeComponent PartsBracket 2 pcsight: Damper installed.Left: Install Spring assy.Spring assy 1pcSide bracketL/R 1 each marked L and RFront ViewRear ViewComponent PartsBracket 2 pcsight: Damper installed.Left: Install Spring assy.Spring assy…1pcSide bracketL/R 1 each marked L and RFront ViewRear ViewPosition of Lid Mounting Holes (Seen from rear) Position of Lid Mounting Holes (Seen from rear)Spring assy2DamperLeft Spring assyCountersunk hole 36.613.21022434 I3.5 bore CounterboreI7.2 Depth 23222Spring assy1.56.613.2DamperLeft spring assy10 I3.5822434 I3.5 bore CounterboreI7.2 Depth 23222182810 2222102222W1 Cabinet inner width measurement – 6A 18D 10 2222 102222W2 Cabinet inner width measurement – 3D81.5 1.51881811A 18Features: Small damper hinge with self-opening function for top-opening lids .Use with a push-latch enables pop-up function of the lid.Use: Small covers for desktop sockets, small covers for machinery and equipment, etc.(Used in combination with push latch, etc.)Range of use: Lids of a size and weight less than the damper torque(See the Specifications table and Maximum Lid Torque Calculation)Operating temperature range: 0- 40°CMeaning of symbolsWarningCautionRequiredProhibitedOrder code170-028-293 Side-mounted0.035±0.008N170-028-294170-028-295 Rear-mounted170-028-296Part No.HG-JHS9-S-BLHG-JHS9-S-WTHG-JHS9-U-BLHG-JHS9-U-WTColour Type TorqueBlackWhiteBlackWhiteHG-JHS9 DAMPER HINGE INSTALLATION INSTRUCTIONSThank you for using our product. Before installation, please read this manual thoroughly to ensurecorrect installation. Please keep this manual at hand for future reference.In this guide, “left” refers to the left side when looking at the cabinet from the front.ABOUT THE PRODUCTSPECIFICATIONS· Screws (to be supplied by the user)Countersunk head screw M3or Countersunk head wood screw 3.1or Countersunk head tapping screw 3Bind head screw M3or Pan head tapping screw 3.1or Bind head tapping screw 34 pcs8 pcs· Screws (to be supplied by the user)Bind head screw M3or Pan head tapping screw 3.1or Bind head tapping screw 312 pcs

/ 2

Related manuals for Lamp 170-028-293