Lamp FD30EX Installation Manual

Also see for FD30EX: Installation manual

Lamp FD30EX Installation Manual Manual pdf 1 page image

1SPECIFICATIONSFOR YOUR SAFETY AND CORRECT INSTALLATIONMax. Door height 2400 mmDoor width 590 1000 mmMin. Door thickness 30 mmMax. Door weight 30 kg/door 1Vertical adjustment 4 mm upward3 mm downwardDepth adjustment ±2 mmDoorDoor pocketFD30EX SLIDING DOOR SYSTEM Installation Manual(Ceiling Mount Type for Pocket Door, with Dual Soft Close)Part No.FD30EXDHCP-PDThank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.Please keep this manual at hand for future reference.ABOUT THE PRODUCTThis is a parts set for a sliding door system for indoor use.7KHGRRUFORVHVLQVRIWPRWLRQVWHSV¿UVWVORZWKHQIDVWandopens with a 1 step soft motion.Two sections of track for easy maintenance after installing.The closing speed of the soft closing type door may changedepending on the ambient temperature, operating method orinstallation quality.Recommended ambient temperature range is 5 to 40 degreescentigrade.1 When using a light weight door, you may feel the resistance ofthe soft closer when opening the door.WARNING If not followed, death or serious injury may result.Caution: If not followed injury or damage may result.ProhibitedWarningCaution RequiredMeaning of symbolsThis product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the doormay fall and cause injury.Provide a frame that can withstand the weight and impact of opening and closing the door. Be sure to use the specified screwsand tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.Do not disassemble or modify any parts other than those described in this document.Follow the specified dimensions, specifications, and alignment of the door and frame. Warping, tilting or twisting of the frameor door may cause failure.If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs orscraps and remove these.This product is a part for architectural fittings. After installation, please check the function and safety of the final product.Please inform the end user how to use the product safely.Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time everyyear is recommended).When installing the “pocket door”, make an “easy-maintenance” structure. For example, use a removable panel.Install the product with two people (in the case of one person, there is a risk of damaging components).