Lamp FD50-H Installation Manual

Also see for FD50-H: Installation manual Installation manual Installation manual User Manual and Assembly Guide

Lamp FD50-H Installation Manual Manual pdf 1 page image

1Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation.Please keep this manual at hand for future reference.This product is a parts set for sliding door system for indoor use.Dual soft closer enables two-way soft closing motion forboth direction.Easy door installation and adjustment.FD50-H SLIDING DOOR SYSTEM Installation Manual(Two-Way Soft Close, Recessed Mount Roller ) Part No.FD50DHCPWhen vertical frameis not used, use doorstopper without fail.Max.Door width 680 1500mmMax.Door height 2400mmMin.Door thickness 24mmMax.Door weight 50kg / doorHeight adjustable range 3mm upward, 4mm downwardForward / backwardadjustment 2mmWARNING: If these warnings are not followed, it may result in death or serious injury.Caution: If these cautions are not followed, it may result in injury or damage.This (sliding door system) should be installed by an experienced person who has correct knowledge. If the system is notinstalled correctly, the door will not operate smoothly, and or may cause injury.It is necessary to manufacture the frame with sufficient strength so it endures the weight of the door and impact shocksupon opening/closing the door. A frame with poor strength might result in improper and slower movement of the door. In theworst case, the door might drop down and cause injury.Do not try to use this product for any other purposes other than originally intended for. Do not use the parts for applicationsthat are out of specification.Do not disassemble nor modify any parts than those described in this document.Make sure to follow the designated measurements and specifications as well as horizontal and verticals angles. Make surethat the frame is not warped, since it may affect the movement of the door.If cutting any parts, make sure to remove any burr before installation. Also check the upper track for any left-over burr orscrap and remove these.This sliding door system is a part for furniture fittings. After installation, make sure to test the finished product thoroughly toensure that it is well-functioning and safe.Make sure to test the screws for slack at regular intervals (one month from first usage, half year and then one time everyyear is recommended).The closing speed of the soft closing type door may change due toambient temperature, operating method or installation quality.Recommended ambient temperature range is 5 to 40 degreescentigrade.ProhibitedWarningCaution RequiredMeaning of symbolsFOR YOUR SAFE WORK AND CORRECT INSTALLATIONABOUT THE PRODUCTSPECIFICATION

/ 4

Related manuals for Lamp FD50-H