6Lamp replacementDisconnect the projector from the main power supply!1) Unscrew the two screws, then open the projector.2) Unscrew the two screws that hold the panel with the filters.3) Remove the panel with the filters.4) Wearing adequate protective gloves, rotate the bulb thatshould be replaced, of 90° CCW, then remove it.5) Insert a new bulb in the socket and rotate it of 90° CW.6) Insert the panel with the filters (see point 3).7) Tight, strongly, the two screws that hold the panel with the filters (seepoint 2).8) Close the projector, and tight, strongly, the two screws (see point 1)Use only 230V GU10 50W halogen lamps.HALOGEN LAMPS CONTAIN SUBSTANCES THAT CAN POLLUTE THE AMBIENCE.DISPOSE OF USING THE APPROPRIATE REFUGES (TOXIC).

Dimensions and weight

Example of installation

How many projector can I drive

Lamp replacement

Lampo IP66 User Manual