165 Commissioning5 Commissioning5.1 Before Commissioning5.1.1 Basic SettingsFirst you must configure the device (ETAMATIC) for the requirements of the system.Therefore, you have to set some parameters.The factory standard settings are indicated by *. We recommend to use the LAMTEC PC software for Windows (available separately).5.1.2 Password Entry5.1.3 Select LanguageSelect parameter 833There are only 5 languages available in a single EPROM. The availability of languages de-pends on the version of the EPROM. For more information refer to the parameter list(DLT1045).Press key 1Press keys 5 and 7 and 8 simultaneously.Press keys 2 to 9 to enter the password (condition on delivery 0000)Press key 11 (ENTER)LED between the keys 13 and 14 is on ( i.e. keys are working).Press keys 13 or 14 to set the display to "Parameters".Press keys 6 or 7 to select the required parameter.Press keys 8 or 9 to change the content.Value Language Value Language Value Language0 German* 8 Danish 16 Coal-Gas-English1 English 9 Portuguese 17 Slovene2 French 10 Polish 18 Czech3 Italian 11 Turk 19 Coal-Oil-French4 Swedish 12 Croatian 20 Coal-Gas-French5 Spanish 13 Cole-Oil-German 21 Hungarian6 Dutch 14 Coal-Oil-English 22 Romanian7 Slovak 15 Coal-Gas-German
