578 Options8 Options8.1 Analogue Outputs via LSB Module Current, alternative Voltage, LSB address 198.1.1 Functional Description• Current module: 4 analogue outputs 0/4 ... 20 mA• Voltage module: 4 analogue outputs 0/2 ... 10 VDC• Possible to quickly wire several modules by means of strapping plugsThe LSB modules are universally applicable output modules, which are controlled via the LSBSYSTEM BUS. In the process, the module is triggered by an adjustable address(1 - 99). The statuses of the outputs are transferred in the data bytes. If an analogue outputmodule with the same address exists in the system, the voltage / current measured there isshown on the respective output.NOTICEAll outgoing lines from the LSB module must be screened. The screens must be applied to thePE rail as short as possible.NOTICEThe termination resistor (120 ) must be installed and activated on the first and the last BUSdevice.Avoid transmission line!
