LanReady Technologies WDR2000 User Manual
                                        | |
Contents
| 
14LAN is short for Local Area Network. This is considered your internal network.These are the IP settings of the LAN interface for the OUTDOOR BRIDGE.These settings may be referred to as private settings. You may change theLAN IP address if needed.IP address: The default IP address is 192.168.2.254. Assign a static IPaddress that is within the IP address range of your network.IP netmask: Enter the subnet mask. All devices in the network must share thesame subnet mask..IP gateway: Enter the IP address of the gateway in your network.(Note: If you change any item, click “submit” to store the value. Or click “clear” torestore previous value. To make settings working click Submit-> Reset->Restart.)AP Setting --> Wireless0 or Wireless1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine