LANCOM 7111 VPN – LANCOM 8011 VPN Chapter 6: Providing dial- up access54EN6.2 Settings for the dial-in computer6.2.1 Dial-up via VPNFor dialing into a network via VPN a workstation requires: an Internet access a VPN clientLANCOM Systems offers the LANCOM VPN Client on the LANCOM CD. It canbe run under Windows 2000 and Windows XP. A detailed description of theLANCOM VPN Client and a description of its installation can also be found onthe CD.For configuring a new profile, select the option 'Configure VPN Remote Access(IPSec over PPTP)' in the LANCOM VPN Client configuration wizard.The wizard asks then for the values that have been defined during the instal-lation of the RAS access in the LANCOM router.6.2.2 Dial-up via ISDNA number of settings must be configured on the dial-in computer. These arebriefly listed here, based on a Windows computer: Dial-Up Networking (or another PPP client) must be correctly configured Network protocol (TCP/IP, IPX) installed and bound to the dial-up adapter New connection in Dial-Up Networking with the call number of the router Terminal adapter or ISDN card set to PPPHDLC PPP selected as the Dial-Up server type, 'Enable software compression'and 'Require data encryption' unchecked