Lancom L-54g Wireless Manual

Also see for L-54 dual Wireless: Manual

Contents

Lancom L-54g Wireless Manual Manual pdf 30 page image

LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless Chapter 3: Basic configuration29ENsible. In the 5 GHz band the automatic setting, where the LANCOM AccessPoint uses TPC and DFS to select the best channel is normally sufficient. Please refer to the LCOS reference manual for more information onTPC and DFS.3.2 Instructions for LANconfig Start LANconfig with Start Programs LANCOM LANconfig.LANconfig automatically detects new LANCOM devices in the TCP/IP net-work. If the search detects an unconfigured device, the Setup Wizard launchesto help you with its basic settings, or indeed to handle the entire processon your behalf (assuming that the appropriate networking environmentexists). If the Setup Wizard does not start automatically, you can manuallysearch for new devices at all interfaces (if the Access Point is connec-ted via the serial configuration interface) or in the network (File Find devices). If you cannot access an unconfigured Access Point, the problem maybe the LAN netmask: In case there are less than 254 potential hostsavailable (netmask >'255.255.255.0'), you must ensure that the IPaddress 'x.x.x.254' is available in your subnet.If you choose automatic TCP/IP configuration, you can continue with step. Give the LANCOM an address from the applicable IP address range. Con-firm with Next. In the window that follows, you first set the password to the configura-tion. Entries are case sensitive and should be at least 6 characters long.