20Section 4 Maintenance and LubricationSPS20 & SPS30 Series Pulverizer Seeders 313-242M 6/26/02Land PrideSection 4Maintenance and Lubrication50Multi-purposespray lubeMulti-purposegrease lubeMulti-purposeoil lubeIntervals at whichlubrication is requiredLubricationLegendMaintenanceProper servicing and adjustment can increase the life of anyimplement. With careful and systematic inspection, you canavoid costly maintenance, time and repair.1. After using your seeder for several hours, check allbolts to be sure they are tight.2. After transporting your seeder for several hours,check all wheel lugs, bolts and nuts to be sure they aretight. Always maintain proper air pressure in the tires.Storage1. At the end of the working season or when yourPulverizer Seeder will not be used for a long period, itis good practice to clean off any dirt or grease thatmay have accumulated on the seeder and any of themoving parts.2. Be sure that the seedbox is completely cleaned beforestoring.3. The square bore of the feed cup drive sprocket hubshould be oiled to prevent seizing. Squirt oil on to thesquare feed cup shaft and move feed cup adjustmentlever back and forth in order to get the oil back into thesquare.4. Lubricate all fittings as indicated.5. When in storage, lower the seeder with rollers on aboard or hard surface and adjust gauge wheels.6. Repaint parts where paint is worn or scratched toprevent rust.7. Replace all damaged or missing decals.8. Store the seeder inside if possible. Inside storage willreduce maintenance and make for a longer seederlife.9. Inspect the pulverizer seeder for loose, damaged orworn parts and adjust or replace if needed.LubricationFeed Cup Drive ShaftType of Lubrication: OilQuantity = Generously5018531