Landa PGA3-27324 Operator's Manual

Contents

Landa PGA3-27324 Operator's Manual Manual pdf 10 page image

PGA • 8.917-988.0 • Rev. 10/12OPERATOR’S MANUAL PRESSURE WASHER10STEP 8: Turn the engine switch to "On" position.On Vanguard engines, move the throttle lever to"Fast" position, shown on the engine as a rabbit.STEP 9: Pull the starter grip. If the engine fails to startafter 2 pulls, squeeze the trigger gun to release pres-sure and repeat step. Return starter gently. After theengine warms up enough to run smoothly, move choketo run position and throttle to fast position.CAUTION: Small engines may kick back. Do nothold pull starter grip tightly in hand.OPERATING INSTRUCTIONSWARNING! Never replacenozzles without engaging thesafety latch on the spray guntrigger. The four color-coded quick connect nozzles provide a wide array ofspray widths from 0° to 40° and are easily accessible when placed in theconvenient rubber nozzle holder, which is provided on the front of themachine.NOTE: For a more gentle rinse, select the white 40° or green 25° nozzle.To scour the surface, select the yellow 15° or red 0° nozzle. To applydetergent select the black nozzle. (Detergent injector and black nozzlenot included)NOZZLESSafetyLatchOn-OffSwitchSOAP