Landa SEA3-1100 Operator's Manual

Also see for SEA3-1100: Operator's manual Operator's manual

Landa SEA3-1100 Operator's Manual Manual pdf 24 page image

LANDA SEA • 8.913-999.0 • Rev. 6/13OPERATOR’S MANUAL PRESSURE WASHER24HaNDHelD WIReleSS OpeRaTINg INSTRUCTIONSfor Wireless Remote Control OperationStep 1: Push the control panel pump switch to the "ON"position (first click). With the switch in this position thewireless remote is ready for use.Step 2: To control pressurewasher in remote mode, presstransmitter button 1 to turn pump"ON". Press transmitter button 2to turn pump "OFF". Pump canalso be controlled manually bypressing the control panel pumpON/OFF switch.Chemical 1: To start chemical1 flow, press transmitter button3. The green indicator light willilluminate when chemical 1 is inuse. Press button 3 again to stopchemical 1 flow.Chemical 2: To start chemical 2 flow, press transmit-ter button 4. The green indicator light will illuminatewhen chemical 2 is in use. Press button 4 again tostop chemical 2 flow.When machine is not in use, push control panel pumpswitch to the "OFF" position. Store transmitter on thetransmitter bracket.NOTe: Normal operating range for the transmitter isabout 500 feet interference-fee (line of site); 300 feetlight interference (inside warehouse, pallet shelves);and 100 feet heavy interference (through concrete/stone walls, metal doors). If greater range is desired,the antenna can be mounted at a seperate location.This requires a longer cable - RG-58-U coaxial withBNC end connectors.89139990-16Transmitterpump SwitchTransmitterbracketChemical 2lightChemical 1lightantenna