Installation and adjustament manual14/26INSTALLATIONLegenda:A) ECUB) Proportioner with cut-off electrovalveC) SwitchD) HarnessE) Connector for programming & diagnosis unitF) Connector for pressure testerG) Pressure diagnosis deviceH) Throttle Position SensorI) SimulatorL) Lambda sensor (oxygen sensor)M) Ignition coilN) BatteryO) Regulator-vaporizerP) ElectrovalveQ) Fuel level sensorR) Temperature sensor4.4.10 Installation of LPG tank and tubing forliquid LPGThe installation of these components is not different fromthe installation of a conventional aspirated system usingthe Venturi mixer.4.4.10.1 LPG tank - General informationThe installation of the LPG tank must comply with thefollowing criteria. For more detailed information onregulations, check local regulations.Fig.4.7