20DANGERTo reduce the risk of electric shock, always unplug the treadmill from the electrical outletimmediately after using. Always unplug the treadmill before cleaning or removing the motorcover.WARNINGTo reduce the risk of burns, fire, electric shock, or injury to persons:1 Treadmill should never be left unattended when plugged in. Unplug from outlet when not inuse.2 Close supervision is necessary when this unit is used by or near children or disabled persons.3 Use this treadmill only for its intended use as described in this manual.4 Do not operate this treadmill if it has a damaged cord or plug, if it is not working properly or if ithas been damaged. Call your selling dealer immediately for examination and repair.5 Keep the power cord away from heated surfaces. Be sure the line cord has plenty of slackand does not get pinched underneath the treadmill when it elevates and lowers. If anextension cord must be used do not use one longer than 6 feet with 12 gauge wire.6 Never operate the treadmill with the air openings blocked. Keep the air openings free of lint,hair, and the like.7 Never drop or insert any object into any opening. Be sure no objects are near or underneaththe moving treadbelt when using the treadmill.8 Do not use outdoors.9 Do not operate where aerosol spray products are being used or where oxygen is beingadministered.10 Connect this appliance to a properly grounded outlet only. Do not use a GFI outlet.11 To disconnect, press the OFF button, remove the SAFETY LANYARD, and unplug the unitfrom the wall outlet.GROUNDING INSTRUCTIONSThis product must be grounded. If it should malfunction or break down, grounding provides a pathof least resistance for electric current to reduce risk of electric shock. This product is equippedwith a cord having an equipment-grounding conductor and a grounding plug. The plug must beplugged into an outlet that is properly installed and grounded in accordance with all local codesand ordinances. We do not recommend using a GFI outlet.120 Volt Treadmills (15 Amp dedicated line)Treadmills marked 120 VAC are intended for use in a nominal 120-volt circuit with a groundingplug. Make sure the product is connected to an outlet having the same configuration as the plug.No adapter should be used with this product.220 Volt Treadmills (15 Amp dedicated line)Treadmills marked 200-250 VAC are intended for use on a circuit having a nominal rating morethan 120V and are factory-equipped with a specific cord and plug to permit connection to a properelectric circuit. Make sure the product is connected to an outlet having the same configuration asthe plug. No adapter should be used with this product. If the product must be reconnected for useon a different type of electric circuit, the reconnection should be made by qualified servicepersonnel.