Lang LRO-1E Installation, Operation, Maintenance, & Troubleshooting

Contents

Lang LRO-1E Installation, Operation, Maintenance, & Troubleshooting Manual pdf 16 page image

ETL File 3028821 16 Rev. A 2002PROGRAMMINGManual Operation:To operate the control without the use of pre-set programs, follow the instructions listed below.1. Turn the oven on by pressing the “Power” button. The oven will automatically start preheatingto the last set temperature.2. Press either the up or down arrows until manual program is displayed.3. Press the “Program” button; this will display the events window where time, temp, steam, vent,and pulse can be set.4. Press the “Select” button to move between functions and the up and down arrows to change thesettings.5. Set the desired tier cooking time by using the up or down arrows and then the “Select” button, toadvance to the temperature setting.6. Enter the desired temperature using the up or down arrows and then the “Select” button, toadvance to the Steam setting.7. If you desire to steam in the first tier enter the time you would like to steam for, using the up ordown arrows, for a maximum of 60 seconds. Press the “Select” button; to advance to the Ventsetting.8. If the vent is to be open for a period of time there are two methods to do this. Either press the“Vent” button during the count down cycle when the vent is to be open and then press it again toclose it, or the other method requires that a separate tier be set up. To do this press the “Select”button until the time for the second tier is highlighted, using the up or down arrow keys select atime that the vent is to be open. Press the “Select” button until the Vent is highlighted. Press theup or down arrows until “o” is displayed. This will open the vent for the total time set for tier.9. If the vent does not need to be opened press the “Select” button until BL is highlighted, thenusing the up or down arrows to select either “—“ (fan on), “d” (fan delay), or “p” (pulse fan). If“—“ is selected then the fan will run continuously through the tier, if “d” is selected then the fanwill be off for the duration of the cook tier, and if “p” is selected then the computer will ask for aon and a off time and pulse the fan for the duration of the tier.10. Once the program has been set load the oven and select “Run”11. The oven will run the program and then beep continuously.