Operation181Adjusting the Print Image PositionAfter master making, you can adjustthe print image position to suit yourneeds. There are two ways:❖❖❖❖ Forward or BackwardUse the {{{{Image Position}}}} keys.❖❖❖❖ Right or LeftUse the side tray fine adjusting di-al.Forward or Backward* Paper feed directionAAAA Press the left {{{{Image Position}}}} keyto move the image forwards, theright key to move it backwards.Note❒ The {{{{Image Position}}}} keys shiftthe image up to 15mm, 0.6" eachway in 0.5mm, 0.02" steps.When the indicator changes, theimage position shifts about5mm, 0.2".❒ When you shift the image for-wards, leave a margin (morethan 5mm, 0.2") at the leadingedge. If there is no margin, pa-per might wrap around thedrum and cause a misfeed.BBBB Press the {{{{Proof}}}} key to check theimage position.GRFORW0E
