Lantech 5 10/100TX w/ 4 PoE Injector Industrial Switch User Manual
                    | |
12Wall Mount Plate MountingFollow the steps below to mount the industrial switch with wall mount plate.1. Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.2. Place the wall mount plate on the rear panel of the industrial switch.3. Use the screws to screw the wall mount plate on the industrial switch.4. Use the hook holes at the corners of the wall mount plate to hang the industrialswitch on the wall.5. To remove the wall mount plate, reverse steps above.Screw the wall mount plates on the Industrial Switch |
Related manuals for Lantech 5 10/100TX w/ 4 PoE Injector Industrial Switch
Lantech mini Switch 800 User Manual
Lantech IPGS-5 Series User Manual
Lantech IES Series User Manual
Lantech IPGS-0005T-4-12V User Manual
Lantech IPGS-0005T-4 User Manual
Lantech IPES-5408T-43 User Manual
Lantech IES-5416T Series User Manual
Lantech IES-5408T Series User Manual
Lantech IPES-0104GT-4 User Manual
Lantech IPGS-5424 User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine