16Wall Mount Plate MountingFollow the steps below to mount the industrial switch with wall mount plate.1. Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.2. Place the wall mount plate on the rear panel of the industrial switch.3. Use the screws to screw the wall mount plate on the industrial switch.4. Use the hook holes at the corners of the wall mount plate to hang the industrialswitch on the wall.5. To remove the wall mount plate, reverse the steps above.

fcc warning

Introduction

Package Contents

Hardware Description

Top View

LED Indicators

Ports

Cabling

Wiring the Power Inputs

Wiring the Fault Alarm Contact

Mounting Installation

Wall Mount Plate Mounting

Hardware Installation

Network Application

Troubles shooting

Technical Specification

Lantech IES-0208CA User Manual

IES-0208CA